Box Quantity: 1. Dimensions: Length: 290 mm Height: 155 mm
Volts: 230 Hz: 50
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single or dual speed (if no blower used)
Pump 3 or Air Blower: x 1 (if pump 2 is single speed)
Extra port: Available only with the addition of an expander board
Heater: Yes
Ozone: Yes
Light: 12 volts or 230 volts
Sensor style: M7 x 2 Pressure Switch: No
Compatible With: GL2000/1 mach 3 control box. Topside controls from the high spec ML range such as theML400, ML700 or ML900.Hot Tubs: Hydrospa Essence PCB SN HSEX2000 54234(MUST NOT BE USED IN METAL BOX, FOR USE WITH PLASTIC BOX ONLY)
This PCB is used as a replacement for an existing GL2000 mach 3 control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.
Volts: 230 Hz: 50
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single or dual speed (if no blower used)
Pump 3 or Air Blower: x 1 (if pump 2 is single speed)
Extra port: Available only with the addition of an expander board
Heater: Yes
Ozone: Yes
Light: 12 volts or 230 volts
Sensor style: M7 x 2 Pressure Switch: No
Compatible With: GL2000/1 mach 3 control box. Topside controls from the high spec ML range such as theML400, ML700 or ML900.Hot Tubs: Hydrospa Essence PCB SN HSEX2000 54234(MUST NOT BE USED IN METAL BOX, FOR USE WITH PLASTIC BOX ONLY)
This PCB is used as a replacement for an existing GL2000 mach 3 control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.
Balboa GL2000 mach3 PCB
PLASTIC BOX ONLY
| Brand: Balboa |
| Product Type: PCB |
| Length: 290mm |
| Width: 150mm |
| Model / Series: GL |
| Circ Pump: Yes |
| No. of Pumps: 2 |
| Blower: Yes |
Box Quantity: 1. Dimensions: Length: 290 mm Height: 155 mm
Volts: 230 Hz: 50
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single or dual speed (if no blower used)
Pump 3 or Air Blower: x 1 (if pump 2 is single speed)
Extra port: Available only with the addition of an expander board
Heater: Yes
Ozone: Yes
Light: 12 volts or 230 volts
Sensor style: M7 x 2 Pressure Switch: No
Compatible With: GL2000/1 mach 3 control box. Topside controls from the high spec ML range such as theML400, ML700 or ML900.Hot Tubs: Hydrospa Essence PCB SN HSEX2000 54234(MUST NOT BE USED IN METAL BOX, FOR USE WITH PLASTIC BOX ONLY)
This PCB is used as a replacement for an existing GL2000 mach 3 control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.
Volts: 230 Hz: 50
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single or dual speed (if no blower used)
Pump 3 or Air Blower: x 1 (if pump 2 is single speed)
Extra port: Available only with the addition of an expander board
Heater: Yes
Ozone: Yes
Light: 12 volts or 230 volts
Sensor style: M7 x 2 Pressure Switch: No
Compatible With: GL2000/1 mach 3 control box. Topside controls from the high spec ML range such as theML400, ML700 or ML900.Hot Tubs: Hydrospa Essence PCB SN HSEX2000 54234(MUST NOT BE USED IN METAL BOX, FOR USE WITH PLASTIC BOX ONLY)
This PCB is used as a replacement for an existing GL2000 mach 3 control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.