The sensor probe slides into the holder and is secured by a plastic nut. The flat plastic 2-pin plug connects directly to the PCB.
Temperature probe diameter: 6 mm. Hi-limit probe diameter: 6 mm.
Temperature cable length: 305 mm (12 inches). Hi-limit cable length: 305 mm (12 inches).
Commonly used with Balboa GS/GL Series such as GS501Z/GL2000 but not GL8000. Also used more recently on the Balboa BP series such as BP601 and BP2100. These sensors are also used on the Balboa Revolution series due to the shorter cable.
Note: If your current sensor has a longer cable (24 inches), make sure to order the longer version as the shorter cable will not reach the necessary connection point. All M7 sensors are calibrated the same, so the only decision is whether you need the long or short cable version.
Temperature probe diameter: 6 mm. Hi-limit probe diameter: 6 mm.
Temperature cable length: 305 mm (12 inches). Hi-limit cable length: 305 mm (12 inches).
Commonly used with Balboa GS/GL Series such as GS501Z/GL2000 but not GL8000. Also used more recently on the Balboa BP series such as BP601 and BP2100. These sensors are also used on the Balboa Revolution series due to the shorter cable.
Note: If your current sensor has a longer cable (24 inches), make sure to order the longer version as the shorter cable will not reach the necessary connection point. All M7 sensors are calibrated the same, so the only decision is whether you need the long or short cable version.
Balboa M7 Sensor (12inch)
| Brand: Balboa |
| Product Type: Sensor Probe |
| Model / Series: M7 |
| Sensor Function: Temp & Hi Limit |
The sensor probe slides into the holder and is secured by a plastic nut. The flat plastic 2-pin plug connects directly to the PCB.
Temperature probe diameter: 6 mm. Hi-limit probe diameter: 6 mm.
Temperature cable length: 305 mm (12 inches). Hi-limit cable length: 305 mm (12 inches).
Commonly used with Balboa GS/GL Series such as GS501Z/GL2000 but not GL8000. Also used more recently on the Balboa BP series such as BP601 and BP2100. These sensors are also used on the Balboa Revolution series due to the shorter cable.
Note: If your current sensor has a longer cable (24 inches), make sure to order the longer version as the shorter cable will not reach the necessary connection point. All M7 sensors are calibrated the same, so the only decision is whether you need the long or short cable version.
Temperature probe diameter: 6 mm. Hi-limit probe diameter: 6 mm.
Temperature cable length: 305 mm (12 inches). Hi-limit cable length: 305 mm (12 inches).
Commonly used with Balboa GS/GL Series such as GS501Z/GL2000 but not GL8000. Also used more recently on the Balboa BP series such as BP601 and BP2100. These sensors are also used on the Balboa Revolution series due to the shorter cable.
Note: If your current sensor has a longer cable (24 inches), make sure to order the longer version as the shorter cable will not reach the necessary connection point. All M7 sensors are calibrated the same, so the only decision is whether you need the long or short cable version.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.